Full Professional English Translation (Industrial Instrument Standard, Consistent with Japanese Instrument Terminology)

Model Definition

• DPM15: Series model, 15 MPa pressure range specification

• AC100/250V: Wide-range AC power supply

• kN: Specification for force sensor compatibility & force unit display (MPa pressure version is also available)

Core Technical Specifications of ACT Digital Pressure Display DPM15-AC100/250V-kN

Input & Power Supply

• Sensor input signal: 0.5~4.5V DC

• Built-in high-precision regulated power supply: DC 5V±0.01V, for powering matched pressure sensors

• Operating power supply: AC100/250V, 50/60Hz

Display & Output

• 3-digit LED digital display

• Two independent open-collector outputs (Max. 40V, 100mA)

• Supports independent 2-point (HI/LO) pressure setting for dual channels

Others

• Weight: approx. 350g

• Alarm threshold setting can be completed via trimmer potentiometer without actual pressure application

• Optocoupler isolated transistor output, long service life

• Durable LED display

Core Functions

• Real-time digital display of pressure / force value

• 4 independent alarm & interlock control points: dual upper limits + dual lower limits

• Preset alarm thresholds without applying pressure

• Compatible with ACT ATS series sensors (e.g. ATS35-02-10)

• Directly connectable to PLC or industrial control systems

Typical Application Scenarios

• Pressure monitoring and overload protection for hydraulic machine tools, injection molding machines and die casting machines

• Pressure indication and interlock control for pneumatic production lines and air compressor systems

• Industrial fluid processing, chemical industry, metallurgy and other scenarios requiring stable pressure

• Pressure closed-loop control nodes for automated equipment

Purchase & Installation Notes

• Must be matched with ACT designated pressure / force sensors to avoid input mismatch

• Confirm power supply voltage is AC100/250V; ensure anti-interference treatment and insulation during wiring

• Open-collector output type; pay attention to pull-up resistor configuration when connecting to PLC

• Install on the panel of industrial control cabinets in dry environments free of strong electromagnetic interference